( Official ) Wiko Cink Stock Rom

( Official ) Wiko Cink Stock Rom/Firmware


ModelCountryVersionFile NameSizeLink
CINKGlobalV21 GingerbreadWIKO_Maj_Cink_V21.zip95 MBDOWNLOAD

You can use these files to :

  • Unbrick Wiko Cink
  • Updating firmware Wiko Cink
  • Unroot Wiko Cink
  • Restore Wiko Cink to 100 % stock factory
  • Solved any issue on Wiko Cink like boot loop, Hardbrick, Lost recovery, or boot screen, etc.


How To Flash Or Updating Firmware Wiko Cink

1. Download the file “WIKO Update – CINK V21” (supplied attached) on your PC.
2. Connect the CINK on your PC using the supplied USB cable:
> Enable “USB mass storage memory” on the CINK notification panel.
> Open the removable disk folder (memory card)
> Drag the file “WIKO Update – CINK V21” as (compressed) as a result of
Displayed records. WARNING ! DO NOT PUT IN A FILE
> Disable the storage memory.
3. Disconnect the CINK and turn it off
4. Press simultaneously the buttons: Volume Up; Volume – and Start / Stop
until the screen displays “Recovery Mode: Volume Up”; “Factory mode: Volume Down”
> Press the Volume Up button
5. Use the Volume button – to move the highlight “Apply update from sdcard”
> Press the MENU button to validate touch
6. The directory of your memory card appears:
> Use the Volume +/- buttons to move the highlight to “WIKO Update – CINK V21”
> Confirm your selection by touch button MENU
7. The update begins, wait until the process finishes bar
and the words: “Install from sdcard complete” appears at the bottom of the screen
> Use the Volume +/- buttons to move the highlight to “reboot system now”
> Press the MENU button to validate touch
8. Your phone will restart and will take a few minutes to complete the final steps.
> The update is completed successfully when the home screen is displayed again.
To check the version of your phone, go to:
> Menu
> Settings
> “About phone”
> “Custom Build Version” version should be named “S8030_PP_F4-B1B8_V21”

please leave comments if you found problems or any broken links. Thank You 🙂