Unbricking Lenovo Vibe shot z90
There are three methods for unbrick Lenovo Vibe Shot Z90 (Z90-7)(Z90-3), This we will do if your Lenovo Vibe shot z90 can’t open recovery mode or fastboot mode, bootloop/ stuck on logo, black screen is not life at all “Hardbrick” and we know that this is not a problem with the machine / Hardware, but only software. This usually occurs because installing false firmware, remove some parts needed by the android system or overclocking CPU. Or do you feel disturbed by virus attacks such as cameraupdates malware ? Well, this is the solution.
Please always sew charged (preferably not less than 70%) of the smartphone and remove SD card during flashing process.
- a compatible USB cable
- Download files below :
|Download Lenovo Vibe shot Z90 Z90-7 Z90-3 Z90A40 Stock Rom||Variants||Download|
FIRST METHODS – Installing the firmware using MI-Flash
- Disable driver signature enforcement:
– Windows 7 : https://boycracked.com/2016/02/07/how-to-disable-digital-signature-in-windows-7/
– Windows 8 / 10 : https://boycracked.com/2016/02/07/how-to-disable-driver-signature-verification-on-64-bit-windows-8-1-or-10/
- Install 7-Zip.exe, then extract & install drivers Qualcomm_Usb_Driver.7z, then ddecompress Stock rom (ROW Firmware ) using 7-Zip.exe to the root of any drive.
- Install Mi___.exe and run .
- Star Flashing using MI-Flash :
– turn off phone
– hit VOL + and plug USB cable (phone will vibrate once)
– in Device Manager (Control Panel) should shows : Qualcomm HS-USB QDLoader 9008
– run Miflash, you should see appropriate COM port
– browse folder with downloaded firmware
– Click button ‘flash’ and wait
– disconnect USB cable, hit POWER key for about 10s (phone will vibrate)
– phone will restart and load new system. It takes some time – and if it hangs, please hit POWER again for 10s, it will reboot again and it should proceed.
SECOND METHODS – Installing the firmware using QPST / Qfill Flashtools
- EInstall 7-Zip.exe, then extract & install drivers Qualcomm_Usb_Driver.7z, then decompress Stock rom (ROW Firmware ) using 7-Zip.exe to the root of any drive.
- Check whether to install the necessary drivers.Open the Device Manager on your PC, then turn off the device (smartphone or tablet) and take out the USB-cable from the device (if it was connected).
Then we press the Volume Up key (Volume Up) and holding it connect USB-cable which is already connected to the USB 2.0 port of your PC – in the Device Manager device should appear Qualcomm Lenovo HS-USB QDLoader 9008
- Run the utility QFIL (Start> All Programs> QPST> QFIL).
- In the window QFIL fill in the following fields :In the Programmer patch specify the path to the file prog_emmc_firehose_89XX.mbn (in my case prog_emmc_firehose_8916.mbn), for this click on Knop «Browse», in the window that opens, specify the path to the folder with the firmware (in my case ROW_S121), then select the file prog_emmc_firehose_89XX. mbn and click “Open.”
Then click on the digging «Load XML …», in the window that opens, select one by one – first rawprogram0.xml and click “Open” and then patch0.xml and also click “Open.”
- Make sure that the program QFIL sees the device as Qualcomm Lenovo HS-USB QDLoader 9008.4. Click on the button «Download» and wait for the end of the process.The device should restart the process of filling in the successful firmware and boot into Android OS.
THIRD METHOD – Installing the firmware using Lenovo Downloaders.
- Installing the USB driver
Download and unzip LenovoA6000_USB_driver.7z , Run as administrator and all items are selected by default, click Next everywhere
- To install the device in 9091 mode, I recommend to start the process of firmware A6000 turn off, holding down the Volume up, turn the power button A6000, after vibro release the power button, and then after a couple of seconds, releasing the volume – set the device to PC mode 9091.
Firmware smartphone through Downloader_Lenovo_V1.0.2
Download and extract to a folder without spaces and letters Downloader_Lenovo_V188.8.131.52z (he and the driver came with firmware). Run as administrator flasher.3. Preferences change is not necessary, they are permanent :
- Select the folder in which you unzipped the firmware :
- Press the start button of the firmware :
- Turn off the smartphone, hold down the volume up, turn the power button smartphone, after vibro release the power button and then after a few seconds by releasing the volume button – you will see this menu :
- Connect your smartphone to your PC with a USB cable to the port (preferably black, USB 2.0) on the back of your PC (on the motherboard). The program will translate it into a flashing mode when you first plug it in, install the drivers for new devices and smartphone will be sewn :
- The flash will take 6-7 minutes, the end of the program will tell you :
- Turn off your smartphone, after the first start by entering the region code after changing the region recommend to immediately wipe do and use your smartphone! PS And a few wishes and parting words :
>>>>> If you do not have the strength to even install the drivers for the chips Qualcomm, the likelihood of a successful process of pouring firmware drops to 3%.
>>>> I advise you to make a fill flash with a PC that is running Windows 7 (in Windows 8.1, but the likelihood of a successful process of pouring firmware reduced to 30%).
>>> The whole process of the firmware with this method is safe, but only in the right hands!